| Picture |
Heading |
Updated |
 |
Two Post Lift with Asymmetrical Lifting Arms, 3.6 Tons
Model Number: FYLJ-3600
Key Specifications/Special Features:
FYLJ-3600 two post lift, 3.6 tonsWith asymmetrical Lifting arms, 3.6 tonsSpecifications:1. Lifting capacity: 3600kg2. Max lift height: 1850mm3. Post height: 3912mm4. Minimum height: 12... |
2017-12-14 |
 |
Automatic measurement mode car wheel balancer tyre balancer tire balancer CE certification
Model Number: NHT-268
Brand Name: FN Machinery
Key Specifications/Special Features:
NHT268 with single protection hood Automatic measurement modeSpecifications: 1. Cycle time: 8sec.2. Maximum wheel weight: 70Kg (155lbs)3. Motor power: 180W-370W4... |
2017-12-06 |
 |
Car lifts
Model Number: YSJ-3000CWith asymmetrical arms,4.0
Key Specifications/Special Features:
Specifications: 1. Lifting capacity: 4000Kg2. Post height: 2880mm3. Car max lifting height: 1800mm4. Lift min stand height: 120mm5. Clearance between posts: 2... |
2017-11-10 |
 |
Semi-automatic Portable Motorcycle Tire Changer for 6"-21
Model Number: NHT 810
Brand Name: faneng
Key Specifications/Special Features:
Specifications:Motor power: 075/1.1, 0.75/1.1kWMax rim diameter:940mm (37")Max rim width: 255mm (10")Operating pressure: 0.8-1.0Mpa (145Psi)Power supply: 110/220/380VP... |
2017-07-24 |
 |
4.0-ton Two Post Hydraulic Gantry Lift
Model Number: YLJ 4000-#9006
Brand Name: faneng
Key Specifications/Special Features:
Specifications:Design: two postType: double cylinder hydraulic liftCertification: CELifting capacity: 4000kg (8800lbs)Lifting height: 1800mmOverall width: 3419m... |
2017-07-17 |
 |
M-500C powered by air compressor scooter lift
Model Number: M-500C
Brand Name: NHT
Key Specifications/Special Features:
Motorcycle/ATV/scooter liftPneumatic control with foot pedalManual clamp for front wheelSpecial steel plates with flower patternService jack includedThick cylinder for 5... |
2017-07-02 |